Hi, CU9 is a big step in mPOS specially in activation. Modern POS activation is now a 12 step process. Functionality wise modern POS is looking good too. Having said that I think there are still some issues around initial connection to RS. Specially in the first step during actiavtion. I follow these steps: make sure RTS is working Check Shared Parameters - RTS is configured for device activation Check Register/Visual Profile - Register has been configured with the correct VP Create entry in devices form - Register has been correctly configured in Devices form Check Database name in Channel Database Form - This is very important. Retail Server uses this configuration to connect to Channel DB. Check connectionstring column in crt.storagelookupview table in to make sure Channel DB connection string has been correctly set. Check Channel Profile - Correct RS url has been entered Check permission – Activate device permission is set for the worker Sales Layout ID in Register - not sure if this important make sure you can see the meta data for RS from the modernpos login make sure you have opened the RS port(s) on your firewall Full Sync after you have done above config and before you try to activate modern POS. I hope this helps. Regards, Mustafa
↧